Advertisement
Quick Links
Sch. 1148/46
Keypad programming guide
Note there are NO DEFAULT CODES in the 1148/46 keypad and
Urmet do not have any record of the Engineer's Password.
If you do not know the Engineer's Password then it will be
necessary to gain access to the rear of the keypad
Advertisement
Related Manuals for urmet domus 1148/46
Summary of Contents for urmet domus 1148/46
- Page 1 Sch. 1148/46 Keypad programming guide Note there are NO DEFAULT CODES in the 1148/46 keypad and Urmet do not have any record of the Engineer’s Password. If you do not know the Engineer’s Password then it will be necessary to gain access to the rear of the keypad...
- Page 2 There are two possibilities when programming the 1148/46 keypad; 1. You know the Engineer’s Password (3 to 8 digits). In this case the keypad can be programmed without being removed from its housing. See Page 2 2. You do not know the Engineer’s Password.
- Page 3 To change the Door Open Code Press then enter the Engineer’s Password and press (BEEP BEEP BEEP). Press 90 OLD DOOR OPEN CODE then press Enter the new Door Open Code and press Press and hold until you hear a long BEEP to exit programming. To change the Door Open Time Press then enter the Engineer’s Password and press...