Table of Contents
Advertisement
Installer Menu
Use the Installer Menu to set up or change operational settings.
See detailed descriptions of the Installer Menu items on the following pages
Installer menu items can be
accessed by using the optional
installer's remote control. Just
press and hold MENU (about 8
seconds) until the menu disap-
pears, then press 9, 8, 7, 6,
then ENTER. To remove the
Installer's Menu, press ENTER
repeatedly. Any changes you
make will be stored in non-
volatile memory.
The Installer menu opens with
the main menu. Use MENU and
SELECT to sequence through the
installer menus and submenus.
Use SELECT or TV/FM to scroll
up/down in the menus and sub-
Menu Function
Value
Item
Range
0-I.
INSTALLER SEQ
0 - 3
1-I.
POWER MANAGE
0 - 7
2-I.
AC ON
0 / 1
3-I.
BAND-AFC
0 - 7
4-I.
STRT CHANNEL
0 - 255
5-I.
CHAN LOCK
0 / 1
6-I.
GHOST CH
0 / 1
7-I.
START VOLUME
0-63, 255
8-I.
MIN VOLUME
0 - 63
9-I.
MAX VOLUME
0 - 63
10-I. MUTE DISABLE
0 / 1
11-I. KEY DEFEAT
12-I. NOT USED
13-I. SCAN MODE
0 / 1
14-I. NOT USED
15-I. SLEEP TIMER
0 / 1
16-I. EN TIMER
0 / 1
17-I. ALARM
0 / 1
18-I. NOT USED
19-I. NOT USED
20-I. FEATURE LEVEL
0 / 1
21-I. V-CHIP
0 / 1
22-I. MAX BLK HRS
0 - 99
23-I. CAPTION LOCK
0 / 1
24-I. TEXT MODE
0 / 1
menus. To change a setting use
the Left/Right ADJ keys. Press
ENTER to return to main menu.
Using the Installer Menu
Items 0-I - 103-I are accessible
only in the Installer Menu. Their
numbers, descriptions, ranges,
factory default settings, and a
place for listing any changes
made on site are given below
and on the following pages.
The Factory Menu that is intend-
ed for qualified service techni-
cians only, is not shown. XX-F
Menu Items (not shown here)
are service type adjustments and
Default
Brief Description of Function and Comments
Value
0
0
Sets number of hours of no activity before auto shutoff.
0
Set to 1 to enable auto turn on at power up.
0
255
Channel at turn-on (255 for last Channel). For digital
channels, use with item 101-I Start Minor Channel.
0
When set to 1, cannot tune from current channel.
0
Set to 1 to enable Ghost Channel display.
255
Volume level at TV turn-on (Set 255 to retain last level).
0
63
0
0/ 1
1
Set to 1 to disable the front panel keyboard MENU,
0
Puts TV On-Off event in Channel Up/Down sequence.
1
1
1
1
1
Set to 1 to enable V-Chip (Parental Control).
12
Sets number of Parental Control blocking hours.
0
Set to 1 to retain caption setting at turn off.
1
Set to 1 to add Text option to closed caption menu.
only qualified technicians hav-
ing specialized test equipment
should access them.
INSTALLERS
INSTALLERS1
INSTALLERS2
INSTALLERS3
INSTALLERS4
INSTALLERS5
INSTALLERS6
INSTALLERS7
TV MICRO V2.08
D2A CARD V2.05
D2A CARD 3-4 MICRO COMM
STATUS
OK
Typical Installer Menu
Leave default set at 0.
Sets Tuning band.
Minimum volume setting.
Maximum volume setting.
Set to 1 to disable mute function.
SELECT and ADJUST keys.
Set to 1 to enable Sleep Timer.
Set to 1 to enable Timer.
Set to 1 to enable Alarm.
Zen 1 Leave default set 1 (1 Zen1).
4
Page 41
Advertisement
Table of Contents
Troubleshooting
