Table of Contents
Advertisement
Auto Program (Channel Search)
Use Auto Program to specify over-the-air Antenna or Cable Service incoming signal source and
automatically store all of the channels found by the channel search in non-volatile memory.
(Do not connect any device to front video input while
TV is in channel search mode.)
1
Using the optional Installer's remote control,
press POWER to turn the TV on.
2
Press MENU repeatedly until the Setup menu
appears.
Using SELECT on the remote control, high-
3
light Auto Program on the menu.
Press the Right or Left ADJ arrow to go to
4
the Auto Program menu.
Using SELECT, choose either Cable TV/Digital
5
Air or Off-Air Antenna/Digital Air on the
menu (see Mini Glossary below.)
6
Press the Right or Left ADJ arrow to begin
the Channel Search.
Press ENTER when the channel search is
7
completed. This is when the progress bars
are filled and a message "COMPLETED SUC-
CESSFULLY" appears on the screen.
Auto Program finds channels being received
by the TV's analog and digital tuners.
Cable will not work unless you subscribe to a
cable service.
After the channel search is complete, use
the features on the following pages to:
Add/delete/blank channels, Include channel
labels, so that they appear on the channel /
time / audio display. Choose from the preset
label selections.
Channels labels are only available for analog
channels.
Channel search for digital channels is avail-
able in either the cable or off air antenna
option.
Mini Glossary
On the Auto Program Menu, select:
OFF AIR ANTENNA/DIGITAL AIR
CABLE/DIGITAL AIR
1
2
4/6
If only over-the-air channels are available, select
Off-Air Antenna/Digital Air.
If you subscribe to a cable service, select Cable TV/Digital Air.
SETUP MENU
TO PROGRAM
AUTO PROGRAM
ADD/DEL/BLNK
CH. LABELS
SOURCE NAME
CLOCK SET
TIMER
CAPTIONS
DEGAUSS
LANGUAGE
POWER
MUTE
1
2
3
5
4
6
7
8
9
0
ENTER
MENU
ALARM
TIMER
AUDIO
SELECT
CH PREVIEW
ADJ
ADJ
7
3/5
Page 19
Advertisement
Table of Contents
Troubleshooting
