IMPORTANT SAFETY INSTRUCTIONS Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference.
Page 4
IMPORTANT SAFETY INSTRUCTIONS (Continued from previous page) 19. Servicing 14. Outdoor Antenna Grounding Do not attempt to service this product yourself as opening or removing covers may expose you to dan- NEC - National Electrical Code gerous voltage or other hazards. Refer all servicing to qualified service personnel.
Installer and User menus. The LT2002 Quickset II Clone Programmer is used to duplicate a Zenith TV’s setup and install it on another identical Zenith TV. See your Zenith/LG Dealer. Note: Design and specifications are subject to change without prior notice.
Setup Checklist Following are the steps necessary to install and set up the TV Setup and Operation Checklist 8. Adjust Installer menu items per requirements. 1. Unpack the TV and all accessories. See pages 47 through 55. 2. Connect the TV to RF antennas and all external video source equipment.
Zenith dealer or computer reseller. Note: The optional PCZ3100 Computer Scan Conversion Card Kit is available from your Zenith dealer. The PCZ3100 allows the TV to display additional computer formats in addition to 800 x 600 @60 Hz SVGA.
Computer Hookup Read the following overview/instructions to set up and use the Presentation TV as a Computer Monitor Make the basic con- TV Front nections as indicat- ed. (Appearance of Computer Video "Card" components may vary Output from those in the illustrations.) Set the computer’s image output set-...
Page 9
Computer Hookup Make the connections with the 15-ft. “Video-Mirror” cable exactly as shown. Also refer to the preceding page for audio connections and “Using the monitor function.” An accessory packet is included with TV Front all TV models. A 15-ft. cable with a “video mirror”...
Page 10
PC Windows Environment Setting up your computer for optimum picture output in the Windows operating system environment WINDOWS Environment The following is a step-by-step procedure for set- 5. Select under the ITEM category ICON SPACING ting your computer’s picture output to optimum (Vertical) display quality.
Menu Bar. puter, you will simply change the FONT and SIZE through the CONTROL PANEL and VIEW. You This Zenith Presentation TV is a high-quality, low have changed the appearance of all your folders cost alternative to a true SVGA monitor.
Computer Source Selection Choosing the computer input on the Source menus SOURCE MENU ANTENNA/CABLE SOURCE AUX VIDEO S-VIDEO FRONT COMPUTER SVGA FRONT COMPUTER SVGA REAR COMPUTER SVGA COMPONENT YPrPb PRESS: SOURCE TO CHANGE PRESS TO CHANGE ENTER TO ACTIVATE < > PRESS KEYS TO ACTIV.
Computer Video Menu Use the Computer Video Menu to optimize the picture from the computer source for best presentation COMPUTER VIDEO MENU CONTRAST BRIGHTNESS GREEN BLUE VERT. SIZE Press the MENU key and repeat to select the VERT. POS. Video menu. Available options are: HORZ.
Computer Setup Troubleshooting Some quick and easy tips to resolving problems when using the Presentation TV as a Computer Monitor Symptoms Possible Cause(s) Probable Solution(s) See Page(s) Computer Image Poor or no • Poor Connections. -Check all cable connections. computer picture. •...
TV Connections Overview A brief overview of the connections available on this TV Use this page for reference when connecting analog or digital signal sources and other source equipment. To hook up source equipment, refer to the next page; shows pages to go to for equipment hookup options. Also, see the front connection panel hookup options on page 24.
AUDIO OUT AUDIO A 300 to 75 ohm adapter is not included with the Zenith TV Back Connections Panel (Expanded View) To get digital with only one RF antenna lead, install a two-way signal splitter If there is only one antenna...
Hook Up Cable Service (CATV) Connect cable service to the TV Cable Service Ty pi ca l TV Ba ck Locate the Antenna/Cable in jack on the back of the TV set. Cable TV Wall Jack Connect the CATV cable that runs from the wall according to the connection diagram shown to the right.
If you have a 75 ohm RF cable, then you don’t need any adapters! VCR Back AV Panel A 300 to 75 ohm adapter is not included output with the Zenith TV. switch Audio Video RF Coaxial Wire (75 ohm)
Hook Up a Cable Box with VCR Connect a cable box and VCR to the TV Cable Service with VCR Cable TV Wall Jack Locate the RF In jacks on the cable box and the VCR. Connect a 75 ohm cable between the cable box wall jack and Cable In on the cable box.
Hook Up S-Video DVD Player or VCR Connect an S-Video source to the TV S-Video DVD Player or VCR VCR Back Locate the S-Video out jack on the DVD player or VCR. On the DVD player or VCR, connect the S-Video out VCR Back AV Panel jack to the S-Video in jack on the TV according to the connection diagram shown to the right.
Hook Up DVD Component Video Connect a Component Video DVD source to the TV Component DVD Player DVD Player with Locate the component video out jacks on Component Video the DVD player. On the DVD player, connect component video out jacks to the Component in jacks on the TV according to the connection dia- gram shown to the right.
Hook Up Composite Audio/Video Connect a Composite Audio/Video source to the TV Composite Audio/Video Locate the Video In Composite Audio/Video input jacks on the TV. Connect the Composite R-L Audio/Video input jacks on the TV to a composite audio/video source device as shown in the illustration. Ty pi ca l TV Ba ck Composite...
Hook Up an External Speaker Connect external speakers or audio amplifier to the TV External Speakers/Audio Amplifier Locate the R-L Audio Out jacks on the back of the TV. Connect to external speakers or an audio amplifier as indicated in the illustration.
Front Panel Controls / Auto Sense Source Inputs Using the front panel controls to operate the TV/Auto Sensing Connections Power Turns TV On and Off. CC (Captions/Text) Typical TV Front Panel Turns selected caption/text option On and Off. power Menu Displays on screen menus.
Remote Control Keys descriptions and their functions for the Remote Control PRG (Program) POWER Programs remote codes. Turns TV On or Off. MODE Keys POWER FLASHBK (Flashback) Select remote operating Returns to the previously modes. tuned channel. CABLE AUDIO MUTE AUDIO FLASHBK MUTE...
Auto Program (Channel Search) Use Auto Program to specify signal source and automatically store all of the channels found by the channel search. First Analog then digital channels will appear in the channel scan With the remote control in hand, press the SETUP MENU POWER key to turn On the Presentation TV.
Picture/Sound Source Selection Make direct connections. Use the TV/VCR Source key, or use the Source menu to choose the sources available for viewing on the TV screen Front S-Video (Camport) AUDIO COMPUTER Computer in Front Rear Computer In Computer SVGA ANTENNA CABLE TV Back...
Source Menu Choose the source of the picture and sound SOURCE MENU SOURCE ANTENNA/CABLE AUX VIDEO REAR COMPUTER SVGA S-VIDEO REAR COMPUTER SVGA COMPONENT YPrPb PRESS: SOURCE TO CHANGE PRESS TO CHANGE ENTER TO ACTIVATE < > PRESS KEYS TO ACTIV. ENTER Selecting Enabled Viewing Sources Selecting Viewing Sources with the...
On-Screen Menus Overview Brief descriptions of the menus / on-screen displays on the Presentation TV Using the MENU key and other keys indicated on the remote, the user can access the menus and displays described below. Menu Name Page Description ON-SCREEN MENUS SETUP MENU Adjusts the basic characteristics of the TV.
Other Menus and On-Screen Displays Use the remote keys indicated below to access these menus and displays CH 11 - PBS 3:12 SLEEP TIMER STEREO PRESS TIMER OLD TIME MOVIES LENGTH 01:00 TIME LEFT 00:36 Ghost Channel Display Sleep Timer Menu Channel/Time/Audio Display Channel number appears on the Press TIMER.
Channel Add-Delete-Blank Fine-tune the end-user channel selection list Menu Operation/Front Control Panel The menus can also be operated by using the TV front panel controls. See page 24 for menu operation instructions. If you need to key-in numbers, then use the remote control. Press MENU repeatedly on the remote SETUP MENU until the Setup menu appears.
Channel Labels Identify Analog channels with Preset Channel Labels SETUP MENU AUTO PRG. ADD/DEL/BK CH. LABELS Using either the NUMBER keypad and Enter CH 32 FOX CLOCK SET or the Channel Up/Down arrows on the TIMER remote, select a channel. CAPTIONS ALARM MENU LANGUAGE...
Page 33
Channel Labels Typical preset Channel Label options available A&E DISC ME/U ACTS ESPN TRAV ESP2 NICK EWTN BRAV PLAY F&V VH-1 CMTV GALA VISN CNBC SCFI SHOW CSPN WTBS CSP2 WWOR INSP TELE LIFE Page 33...
Clock Set Set the Clock on the Presentation TV SETUP MENU AUTO PROGRAM CLOCK MENU ADD/DEL/BLNK CH. LABELS TIME SET 6:30 AM TIMER CLOCK SET TO SET CLOCK TIMER CAPTIONS ALARM MENU LANGUAGE With the Setup menu displayed, use the Up/Down arrow to highlight the Clock Set POWER option as shown.
Timer (On-Off Timer Setup) Set up On/Off Timers Note: On/Off Timers operate independently of each other. SETUP MENU TIMER AUTO PROGRAM ADD/DEL/BLNK CH. LABELS ON TIME 9:00 AM TIMER CLOCK SET OFF TIME 7:00 PM TIMER TIMER TO SET TIMER CAPTIONS ON/OFF TIMER ALARM MENU...
Page 36
Captions: Analog-Digital Caption Setup Overview Set up Closed Caption/Text options for the end user Analog-Digital Closed Captions/Text Overview, End-user Setup The caption/text feature is designed to be available to the end user on either an analog or digital channel. For the end user to get analog captions, all the user needs to do is press CC on the remote and select On - - same for digital channels, select On and pick a language.
Captions: Analog-Digital Menu Structures Review Analog and Digital Captions options available Note: Digital captions are only available on some digital channels. Analog Captions Menu Structure CAPTION SETUP SETUP MENU AUTO PROGRAM ADD/DEL/BLNK OPER. MODE QUICK CH. LABELS SEL. CC TYPE CLOCK SET CC CAPTION TIMER...
Alarm Menu Use the Alarm menu to set a time for the TV to automatically turn itself On SETUP MENU ALARM MENU AUTO PROGRAM TIME NOW 3:11 ADD/DEL/BLNK CH. LABELS CLOCK SET 6:10 TIMER TIMER CAPTIONS PRESS DIGITS TO SET TIME ALARM MENU TO SET ALARM TIMER TO SELECT AM/PM...
Language Select the language for the on-screen menus Menu Operation/Front Control Panel SETUP MENU The menus can also be operated by using the AUTO PROGRAM TV front panel controls. ADD/DEL/BLNK See page 24 for menu operation instructions. CH. LABELS If you need to key-in numbers, then use the CLOCK SET remote control.
Audio Menu Set up the audio menu options for the end user On the remote, press MENU repeatedly to AUDIO MENU go to the Audio menu. Using the Up/Down arrow on the remote control, highlight the audio menu option you want to change. Choose from: •...
Page 41
Audio Menu: Digital Audio Language Selection Use the AUDIO button to select digital audio languages, if available DTV 66-1 News and local programming 5:50 PM Dolby Digital Thu Jan 19, 2007 4:00 PM 6:00 PM Multi-lingual 16:9 1080i TV-PG Indicates the broadcast has additional audio languages available.
Video Menu Use the Video Menu to customize the picture’s appearance On the remote, press the MENU key repeat- VIDEO MENU edly until the Video menu appears. Your options are: CONTRAST BRIGHTNESS • Contrast: Adjusts the level of difference COLOR TINT between white and black in the TV picture.
Parental Control Menu This feature can “block” undesirable programming from appearing on the TV. Set restrictions using Age Block for all programming; TV and movies. End user can only set restrictions using Ch Preview menu on any Analog channel or Aux source (some models digital channels also).
Page 44
Parental Control Menu After you have read the preceding page, follow instructions below to set up and activate Parental Control SOURCE MENU SETUP MENU AGE BLOCK AUDIO MENU GENERAL UNBLOCKED VIDEO MENU CHILDREN PRESS CC TO RETURN PARENTAL CONTROL AUX SOURCES MPAA RATING AGE BLOCK TO BLOCK...
Page 45
Parental Control TV/Movie Rating Guidelines TV Parental Guidelines Rating System TV-G General Audience Considered suitable for all audiences; children may watch unattended. TV-PG Parental Guidance Unsuitable for younger children, may contain: Suggested Suggestive Dialog, Foul Language, Sex and Violence Scenes. TV-14 Parents Strongly Unsuitable for children under 14, may contain:...
Page 46
Parental Control Menu Structure/V-Chip Installer Setups Unblocked Unblocked Blocked TV-G and Above TV-PG and Above TV-14 and Above Unblocked TV-MA G and Above TO BLOCK PG and Above PG-13 and Above Unblocked R and Above TV-Y and Above NC-17 and Above TV-Y7 General Children...
Installer Menu Use the Installer Menu to set up or change operational settings. See detailed descriptions of the Installer Menu items on the following pages Installer menu items can be ting use the Left/Right ADJ Menu Items (not shown here) accessed by using the remote keys.
Page 48
Installer Menu Installer Menu Items 25 through 61 Menu Function Value Default Brief Description of Function and Comments Item Range Value 025. FUNCTION PRE 0 - 3 Controls channel preview in Pay-Per-View function menu. 026. NOT USED 027. NOT USED 028.
Page 49
Installer Menu Installer Menu Items 062 through 087 Menu Function Value Default Brief Description of Function and Comments Item Range Value 062. BCK. VIDEO M. 0 - 7 Custom background color for the Video menu. 063. EN. PTL. COL. 0 / 1 Set to 1 to enable custom color for the V-Chip (Parental Control) menu.
Page 50
2 = HRC AFC 6 = HRC Fixed 3 = IRC AFC 7 = IRC Fixed *M.P.I. Multiple Protocol Input: Zenith protocol for remote control of TV through RJ11 (M.P.I.) jack on Channels are accessed faster when fixed modes are TV connections panel.
Page 51
Installer Menu Detailed Descriptions for Installer Menu Items 04 through 14 when some channels are not on nominal frequen- that Volume level when it is turned on. The range cies. Note: BAND is automatically set by AUTO of values are 0 - 63, 255. If 255 is selected, the PROGRAM.
Page 52
Set to 1 for operation with systems from On 20. FEATURE LEVEL Command Corporation. Default set to ZEN 1 for Zenith IR remote control 30. ACK MASK operation. Set O, P LBL for Zenith Private Label IR M.P.I. Communication Parameter. Leave at remote control operation.
Page 53
Installer Menu Detailed Descriptions for Installer Menu Items 40 through 59 40. AUTO CAMPORT menu option in Source menu. Set to 0 to add ‘CAMPORT’ to Source menu (if item 51. DIS. VCHIP M. (Disable V-Chip Menu) 034 is set to 1). Set to 1 to remove ‘Camport’ Set to 1 to disable V-Chip menu.
Page 54
Installer Menu Detailed Descriptions for Installer Menu Items 60 through 75 60. EN. VID. COL. (Enable Video Menu Color) 68. BCK. SRC. M. (Source Menu Background Set to 1 to enable custom color settings for the Color) Video menu. Set to 0 to disable custom color set- 0 = Black 3 = Yellow 6 = Cyan...
Page 55
Installer Menu Detailed Descriptions for Installer Menu Items 76 through 106 76. DEFEAT XDS 86-I. V. MUTE TIME (Video Mute Delay Time) Set to 1 to disable XDS display. Set to 0 to enable Controls Video muting delay time when switching XDS display.
Page 56
To operate the LT2002, use the indicated keys on the HP602, LP702 or MBR3447 Zenith installer remotes, or the front panel keys on the TV receiver. Notes: Use the MPI port to attach clone. Do not run Auto Program while cloning.
TV’s operating guide. • Use an Zenith MBR remote like the MBR3447 or the TV front panel controls The master TV’s Setup is what you will to operate Learning and Teaching copy to the Clone Programmer and menus.
Page 58
Press 1 to select the “Learn From TV” not be set directly, the time needs to option, then press ON/OFF, POWER, or be copied from a Zenith TV equipped ENTER to go to the Memory Bank with M.P.I. Input capability.
Page 59
• Procedure interrupted. -Wait until procedure complete message is displayed. • Different TV models. -Cloning is only possible with identical model Zenith TVs. Clone time disappeared. • Batteries were removed. -Batteries must remain installed to retain time settings. New Setup not present.
FFWD not, try the other codes listed and continue STOP from Step 3. Programming the Zenith remote will allow you to use one remote to work up to 4 differ- ent devices, if all remote operating modes are programmed! Not all devices can be controlled by the Zenith remote.
If Programming the Remote did not find the code, try this procedure to automatically find the code for the device. If the remote becomes inopera- ble, go back to “Programming The Remote” and enter the Zenith TV code (001) for Step 5, see page 60.
Remote Control Amplifier Volume Override Setup Set up the TV/amplifier/device sound output to be controlled in other remote control modes. For example, in VCR mode, sound is heard on TV. In Aux mode, Aux sound is heard on Aux device. In Cable mode, you may elect to have the cable box sound heard on the TV or other audio device.
Page 67
Remote Control Brand Programming Codes Find the device codes you need to program the remote. On this page: Audio Devices, CD Players Aux (Audio) GOLDSTAR ..005 NAKAMICHI ..051 052 RCA ..004 HITACHI .
Key Functions by Remote Operating Mode Remote Operating Mode Key Functions TV Mode VCR Mode Cable Mode AUX Mode Name Zenith 001 Code 225 Code 102 Code 054 CABLE AUDIO POWER Power Power Power Power Power Power Power AUDIO Digtl Aud Lang...
Page 69
Troubleshooting Some Quick and Easy Tips for Resolving Problems Tip: If TV does not function normally, try disconnecting power for 5 seconds. Installer Menu Settings and TV Problems Installer menu item settings dictate how the TV functions. If a feature is not available or a problem can not be solved, check the installer menu settings to assure feature and functional items are set to appropriate levels, etc.
Page 70
Troubleshooting Some Quick and Easy Tips for Resolving Problems Symptoms Possible Cause(s) Possible Solution(s) Page(s) Picture Reception Poor or no picture. • TV station problems. Try a different channel. 24/25 • Video menu not adjusted properly. Check Video menu option settings. Local interference.
Page 71
Troubleshooting Some Quick and Easy Tips for Resolving Problems Symptoms Possible Cause(s) Possible Solution(s) Page(s) Source Selection / Source Image Problems (For Sources to appear in Source menu, they must be enabled in Installer menu.) Can’t select S-Video • Not enabled in Installer menu. Set installer menu item 037 Y/C Enable to 1.
Troubleshooting/Maintenance Some Quick and Easy Tips for Resolving Problems Symptom(s) Possible Cause(s) Possible Solution(s) Page(s) Parental Control Problems Guest has left Parental • Parental Control needs to Press and hold down MENU key until menu disappears. 43 Control active, password be reset.
Mono (monaural) sound is one channel of sound. On more than one speaker, all the speakers play the same audio. M.P.I. Multiple Protocol Interface: ZENITH protocol for external control of TV through RJ11 (M.P.I.) input jack on TV connections panel.
Notes Write down any special considerations/comments regarding your installation Page 74...
Page 75
Notes Write down any special considerations/comments regarding your installation Page 75...
Page 76
Notes Write down any special considerations/comments regarding your installation Page 76...
Page 77
Notes Write down any special considerations/comments regarding your installation Page 77...
Page 78
Notes Write down any special considerations/comments regarding your installation Page 78...
Page 79
Notes Write down any special considerations/comments regarding your installation Page 79...
Page 80
Zenith Direct-View TV Warranty Direct-View Color TV Welcome to the LG family! We believe that you will be pleased with your new Zenith TV. Please read this warranty carefully, it is a “LIMITED WARRANTY” as defined under Federal Law. This war- ranty gives you specific legal rights, and you may also have other rights that vary from state-to- state within the U.S.A.