Audio Menu - Zenith Direct-View Concierge H27H38DT Installation Manual

Audio Menu: Digital Audio Language Selection
Use the AUDIO button to select digital audio languages, if available
News and local programming
Thu Jan 19, 2007
Multi-lingual
Indicates the broadcast has additional
audio languages available.
Note: The broadcaster has control of
any additional languages available. If
a program display shows another lan-
guage is being broadcast, press the
AUDIO button to select that audio. If
however, no other language is being
included on the program's signal, no
other audio may be heard. This con-
dition is not the fault of the TV. If no
other language is being broadcast, the
TV can't play it. To hear audio, you
must select an active language.
On the optional Installer's remote,
1
press AUDIO repeatedly to scroll the
available digital audio languages on
the selected channel.
• As mentioned above, even if anoth-
er language is indicated as being
available, if it is not being added to
the audio signal, no audio will be
heard for that additional language.
Mini Glossary
STEREO SOUND Stereo (stereophonic) sound refers to audio that's divided into right and left sides.
MONO SOUND Mono (monaural) sound is one channel of sound. On more than one speaker, all
the speakers play the same audio.
CUSTOM Your own audio menu settings.
PRESET Resets audio menu values to their original settings.
4:00 PM 6:00 PM
16:9 1080i TV-PG
1
DTV 66-1
5:50 PM
Dolby Digital HD
POWER
MUTE
1 2 3
5
4 6
7 8
9
0
ENTER
ALARM
TIMER MENU
AUDIO
SELECT CH PREVIEW
ADJ ADJ
Page 35