Front Panel Controls/Source Inputs - Zenith Direct-View Concierge H27H38DT Installation Manual

Front Panel Controls / Source Inputs
Using the front panel controls to operate the TV
A CC (Captions/Text)
Turns selected caption/text option on and off.
Adjust (Left/Right)
B
Changes menu options.
C
Select
Chooses menu options.
D
Menu
Displays on screen menus.
E
Volume (Down/Up)
Decreases/increases sound level.
F
Channel (Down/Up)
Chooses next available
channel.
G
Power
Turns TV on and off.
H
Video (In) Camport
Input for a video signal from
auxiliary equipment.
I
L - Audio - R (In)
Left/Right Channel audio input jacks.
The front Video jack is an Auto Sense source connection.
With a cable connected, the TV will automatically change
its source setting to CAMPORT, as indicated on the
channel-time display.
If you have a device connected to the front Video
jack and the Auto sense source connection is turned on, you
will not be able to change channels using the TV tuner until you
have disconnected the device.
Installer Note: The Menu, Select, and Adjust Left/Right keys shown above
do not have legends on the actual TV. These keys are turned Off in the
Installer menu. To enable the Menu, Select and Adjust keys on the front
panel, set installer menu item 11-I to 0. When finished using these keys
it is advisable to disable them by setting item 11-I back to 1; this will
deny the end/user guest access to the onscreen menus on the TV from the
front control panel.
Page 20
Typical Front Panel Controls
captions adjust select
A B
C
menu volume channel
E
D
F
video in L audio R
I
H
power
G