Picture/Sound Source Selection - Zenith Direct-View Concierge H27H38DT Installation Manual

Picture/Sound Source Selection

Note: The Installer by changing options in the Installer menu, can change the
default setup and determine which source connections are available.
• Auto Source Sensing Connection: The front video input (Camport) overrides all
other source inputs. The Auto Sense feature is factory preset to be On -- for the front
video input.
• The Source menu shows which picture and sound sources are available.
Typical
TV Front
Antenna
Cable
M.P . I.
1
Hook up a device to front Video/Audio
In, to use this Auto Sense source.
Disconnect the device when finished.
To access other available sources, use
2
the Source menu or use Channel
Up/Down to select the Aux input.
Auto Source Sensing Connections override all other sources. The front Video
in jack is an Auto Sense source connection. If you have a device connected to
this jack you will not be able to change channels using the TV tuner until you
have disconnected the device.
Typical
TV Back
Matrix
Digital
Out
Antenna
Video
R- Audio - L
In
In
M.P . I.
S-Video
R- Audio - L
In
In
Camcorder
VCR
S-Video
DVD
Audio/Video
Component Video
Connectable sources
See pages 12 - 18
Antenna/Cable
Camport (Front Video input)
Aux Video (Rear Video Inputs)
Rear S-Video
Page 21