Table of Contents
Advertisement
Installer menus
Use the Installer Menu to set up or change operational settings
See descriptions of the Installer items on the following pages...
Accessing the Installer's Menu
Installer's menu items can be accessed by using the optional LP702 installer's remote
control. Just press and hold MENU (about 8 seconds) until the display changes, then
press 9, 8, 7, 6, then ENTER. To exit the Installer's Menu, press ENTER again. Any
changes you make will be stored in nonvolatile memory.
The Installer's menu opens with item 0-I, INST. SEQ. Use the SELECT key to sequence
through the available menu items. Or, access an item directly by entering the line
number, then pressing MENU. For example, to access the Sleep Timer option which is
on line 15-I, press 15, then MENU. To change a setting use the Left/Right ADJ keys.
Using the Installer's Menu
Items 0-I - 86-I are immediately accessible only upon entering the Installer's Menu.
Their numbers, descriptions, ranges, factory default settings, and a place for listing
any changes made on-site are given below and on the following pages. A Factory
Menu that is intended for qualified service technicians only, is not shown. Normally
Factory menu items do not require adjustment.
Installer Menu Items 0-I through 25-I
Menu Item
Function
0-I
INSTALLER SEQ
1-I
POWER MANAGE
2-I
AC ON
3-I
BAND/AFC
4-I
STRT CHANNEL
5-I
CHAN LOCK
6-I
GHOST CH.
7-I
START VOLUME
8-I
MIN VOLUME
9-I
MAX VOLUME
10-I
MUTE DISABLE
11-I
KEY DEFEAT
12-I
IR BANKS EN.
13-I
SCAN MODE
14-I
STRT CH IN SM
15-I
SLEEP TIMER
16-I
EN TIMER
17-I
ALARM
18-I
NOT USED
19-I
NOT USED
20-I
FEATURE LEVEL
21-I
V-CHIP
22-I
MAX BLK HRS
23-I
CAPTION LOCK
24-I
TEXT MODE
25-I
FUNCTION PRE
Value Range
Default Value
0 - 3
0
0 - 7
0
0 / 1
0
0 - 7
0
0 - 255
255
0 / 1
0
0 / 1
0
0 - 63, 255
255
0 - 63
0
0 - 63
63
0 / 1
0
0 / 1
1
0 / 1
0
0 / 1
0
0 / 1
0
0 / 1
1
0 / 1
1
0 / 1
1
0 / 1
1 Zen 1
0 / 1
1
0 - 99
12
0 / 1
0
0 / 1
1
0 - 3
0
0IMCRMI038A 01.83
0-I
SN: XXXX-XXXXXXXX
UPN: XXX-XXX-XXX-XXX
XX/XX/XX
Brief Description of Function and Comments
Leave default set 0.
Sets number of hours of no activity before auto shutoff.
Set to 1 to enable auto turn on at power up.
Tuning band, see detailed descriptions.
Channel at turn-on (255 last Channel viewed at turn off).
When set to 1, cannot tune from current channel.
Set to 1 to enable Ghost Channel display.
Volume level at TV turn-on (Set 255 to retain last volume level).
Minimum volume setting.
Maximum volume setting.
Set to 1 to disable mute function.
Set to 1 to disable Menu, Select, and Adj keys on front panel.
Set to 1: enables TV to respond to IR codes to change channel bank directly.
Puts On-Off in Ch Up/Down sequence.
Set to 1 to put TV On/Off below start channel number.
Set to 1 to enable Sleep Timer.
Set to 1 to enable Timer.
Set to 1 to enable Alarm.
Leave default set 1 (1 Zen 1)
Set to 1 to enable V-Chip
Select number of Parental Control blocking hours.
Set to 1 to retain Caption setting at turn off.
Set to 1 to add Text option to closed caption menu.
Controls channel preview in Pay-Per-View function menu.
01
INST. SEQ.
0
TE = 10110000
Typical Installer Menu
XX-F Menu Items (Not
shown here) are service-
type adjustments and only
qualified technicians having
specialized test equipment
should access them.
P A G E 3 1
Advertisement
Table of Contents
