Standard Cmos Setup - Supermicro SUPER PIIISCA User Manual

S
UPER PIIISCA/PIIISCD/PIIISCE/370SC3/370SCI/370SCD User's Manual

Standard CMOS Setup

Date and Time Configuration
Select the Standard option. Select the Date/Time icon. The current values
for each category are displayed. Enter new values through the keyboard.
Floppy A
Floppy B
Choose the Floppy Drive A or B icon to specify the floppy drive type. The
settings are Not Installed, 360 KB 5¼ inch , 1.2 MB 5¼ inch , 720 KB 3½
inch , 1.44 MB 3½ inch or 2.88 MB 3½ inch . Note: The Optimal and Fail-
Safe settings for Floppy Drive A are 1.44 MB 3 1/2 inch and for Floppy
Drive B are Not Installed .
Pri Master
Pri Slave
Sec Master
Sec Slave
Select these options to configure the drive named in the option. Select Auto
Detect IDE to let AMIBIOS automatically configure the drive. A screen with a
list of drive parameters appears. Click on OK to configure the drive.
Type
SCSI
IDE
How to Configure
Select Type . Select Not Installed on the drive
parameter screen. The SCSI drivers provided by
the SCSI manufacturer should allow you to configure
the SCSI drive.
Select Type . Select Auto to let AMIBIOS determine
the parameters. Click on OK when AMIBIOS
displays the drive parameters. Select LBA Mode .
Select On if the drive has a capacity greater than
540 MB. Select the Block Mode . Select On to
allow block mode data transfers. Select the 32-bit
mode . Select On to allow 32-bit data transfers.
Select PIO mode . Select On to allow AMIBIOS to
determine the PIO Mode. It is best to select Auto to
allow AMIBIOS to determine the PIO mode.
select a PIO mode that is not supported by the IDE
drive, the drive will not work properly. If you are
absolutely certain that you know the drive's PIO
mode, select PIO mode 0-4, as appropriate
4-4
If you