Supermicro SUPER PIIISCA User Manual page 91

Error Message
CMOS Time and
Date Not Set
D: Drive Error
D: Drive Failure
Diskette Boot Failure
Display Switch
Not Proper
DMA Error
DMA #1 Error
DMA #2 Error
FDD Controller Failure
HDD Controller Failure
INTR #1 Error
INTR #2 Error
Appendix A: BIOS Error Beep Codes
Information
Run Standard Setup to set the date and time
in CMOS RAM.
Hard disk drive D: does not respond. Run
the Hard Disk Utility.
disk type in Standard Setup to make sure that
the hard disk drive type is correct.
Hard disk drive D: does not respond.
Replace the hard disk.
The boot disk in floppy drive A: is corrupt. It
cannot be used to boot the computer. Use
another boot disk and follow the screen
instructions.
Some compters require a video switch on the
motherboard be set to either color or
monochrome. Turn the computer off, set the
switch, then power on.
Error in the DMA controller.
Error in the first DMA channel.
Error in the second DMA channel.
The BIOS cannot communicate with the
floppy disk drive controller.
appropriate connections after the computer is
powered down.
The BIOS cannot communicate with the hard
disk drive controller. Check all appropriate
connections after the computer is powered
down.
Interrupt channel 1 failed POST.
Interrupt channel 2 failed POST.
A-5
Also check the D: hard
Check all