Auto-Detect Hard Disks - Supermicro SUPER PIIISCA User Manual

S
UPER PIIISCA/PIIISCD/PIIISCE/370SC3/370SCI/370SCD User's Manual
Keyboard Wake-up Function
This option specifies which key will wake up the system when pressed.
The settings are Disable, Ctrl F1, Space and Any Key .
Onboard Game & Mini Port
This option is used to either Enable or Disable the Game/Mini Port.
Game Port Base Address
This option specifies the base address to be used for the game port. The
settings are 200h and 208h .
MIDI Port Base Address
This option specifies the base address to be used for the MIDI port. The
settings are 298h, 330h and 300h .
MIDI IRQ
This option specifies the IRQ to be used for the parallel port. The
settings are 5, 7, 9 and 10 .
Onboard IDE
This option specifies the onboard IDE controller channels to be used. The
settings are Disabled, Primary , Secondary or Both .

Auto-Detect Hard Disks

This section allows BIOS to look for and configure any hard disk drives on
your system. After highlighting this option, hit <Enter> and wait momentarily
while BIOS performs the auto-detect.
appear properly configured.
Change User Password
Change Supervisor Password
The system can be configured so that all users must enter a password
every time the system boots or when the AMIBIOS setup is executed.
You can set either a Supervisor password or a User password.
do not want to use a password, just press <Enter> when the password
prompt appears.
You will soon see the disk drives
4-20
If you