Check Point QUANTUM SPARK 1500 Administration Manual page 86

If your appliance is not registered:
1. Browse to: https://smbregistration.checkpoint.com
2. Enter the MAC address and Registration key. These values can be found on the Home
> License page.
3. Select Hardware Platform.
4. Select Hardware Model.
5. Click Activate License.
You are notified that you successfully activated the appliance license.
After initial activation, the Activate License button shows as Reactivate. If you make changes
to your license, click Reactivate to get the updated license information.
If you are offline while configuring the appliance:
1. Browse to Check Point User Center
2. Enter the appliance's credentials, MAC address, and registration key from the Home >
License page.
3. After you complete the registration wizard, you are prompted to download the activation
file. Download it to a local location. This is needed for the next step.
4. In Home > License, click Offline.
The Import Activation File window opens.
5. Browse to the activation file you downloaded and click Import.
The activation process starts.
The region is set when the license is installed. The region determines the wireless frequency
and parameters, as the regulations vary according to region.
If you are using a trial license, only basic radio settings, are allowed in all zones. A warning
that selected wireless radio settings are not applied shows on the Summary page of the First
Time Configuration Wizard and also on the Device > License page. For more information on
basic wireless radio settings, see sk159693.
If you select a country and install a valid license, but the wireless region of the device does not
match the selected country, a warning message shows and you must edit the country
information. When the country and wireless region match, you see the full settings.
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Centrally Managed Administration Guide
.
Managing Licenses
| 86