Check Point QUANTUM SPARK 1500 Administration Manual page 110

Connection Type
PPPoE
PPTP
or
L2TP
Bridge
v. If applicable, select the option Use connection as VLAN.
vi. Optional: Expand the DNS Server Settings section and configure the
required DNS servers..
This section appears for specific connection types (for example, for Static
IP and Bridge).
c. Configure the required settings on the Connection Monitoring tab:
Procedure
Note - Based on the selected connection type on the Configuration tab,
some options may not be available.
i. Expand the Connection Monitoring section.
ii. Select Automatically detect loss of connectivity to the default gateway to
detect connectivity loss by sending ARP requests (pinging) to the default
gateway and expecting responses.
Important - If you use Dynamic Routing, you must clear this option
to prevent probing of the default gateway.
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Centrally Managed Administration Guide
Additional Fields
n ISP login
username
n ISP login
password
n Server IP
address
n ISP login
username
n ISP login
password
n Bridge to
n
DHCP/Static IP
n Default
gateway
Managing the Device
| 110