Operation - Cuisinart SmartPower SPB-7 Series Instruction And Recipe Booklet

OPERATION

1. Place the motor base of your Cuisinart
Blender onto a flat, sturdy surface. It is important that the sur-
face be clean and dry. Assemble the blender by
following the assembly instructions. Once the jar is assembled
and is in position on the motor base, plug the Cuisinart
SmartPower Electronic Blender into an electrical outlet.
™
. Add all necessary ingredients to the blender jar, and replace the
cover. You may add more ingredients by lifting the
measured pour lid and dropping ingredients through the fill area.
Replace the measured pour lid after adding ingredients. Do not
place hands into blender jar with blender
plugged in.
Note: Add liquid ingredients first, then follow with solid ingredients.
This will provide more consistent blending and prevent unneces-
sary stress on the motor.
Note: To remove blender jar cover, lift edge of cover upwards.
Lifting measured pour lid will not remove cover.
3. TO START BLENDING: Press the On button. The red On LED
light will flash, indicating that the blender is turned on but no
speed has been selected.
4. PRESS THE DESIRED BLENDING SPEED: Both the On
indicator light and the activated speed indicator light will glow.
The blender will now be functioning at the desired speed. It is
possible to switch speeds without pressing the Off button, by
simply pushing the next desired speed button.
Stir
Chop
Mix
5. TO STOP THE BLENDING PROCESS: Re-press the activated
speed button. The blending process will stop. The red On indica-
tor light will continue to flash to let you know that the blender is
still on and can be reactivated by pushing the desired speed
SmartPower Electronic
® ™
®
Ice Crush
Pulse
Liquefy
On
Purée
Off
QUICk REFERENCE GUIDE
To activate blender
To begin blending
To change speeds
To pulse
To crush ice
To stop blending
(and deactivate blender)
To stop blending
(in pulse or ice crush mode)
To stop blending in stir,
Chop, Mix, Purée, or Liquefy
Mode
SPEED SELECTION GUIDE
Refer to this guide to choose the best speed for your desired result.
Ingredient/Recipe
Reconstituting frozen
orange juice concentrate
Mayonnaise
Salad dressings
Nuts
Whipping cream
Bread crumbs
Grating citrus zest
Milk shakes
Baby food
Health drinks
Frozen cocktails
Grinding hard cheese
Spices
Ice
Press On – The blender is in On mode.
Press desired speed button.
Press desired speed button.
In On mode press Pulse, then press
and release desired speed button as
needed.
In On mode, press and release
Ice crush button as needed.
Press Off button.
Release button.
Press speed button again. This will
return the blender to On mode. Press
Off button to turn blender off.
Speed Result
Stir Smooth and full-bodied
Stir Thick and creamy
Stir Desired consistency
Chop Coarse to fine
Mix Thick topping
Mix Uniformly fine
Purée Uniformly fine
Purée Smooth and creamy
Purée Smooth and creamy
Liquefy Smooth and creamy
Liquefy Thick and slushy
Liquefy Coarse to fine
Liquefy Coarse to fine
Ice Crush Snowy
5