Attaching The Plastic Wedges - Beko B5XRCNA366HXB User Manual

Installation
If two coolers are to be installed
side by side, there should be at
least 4 cm distance between
them.
• Our company shall not be liable for any
damages that will arise when the product is
used without grounding and electrical
connection in accordance with the national
regulations.
• Power cable plug must be within easy reach
after installation.
• Do not extension cords or cordless multiple
outlets between your product and the wall
outlet.
Hot Surface Warning!
Side walls of your product is
equipped with refrigerant pipes to
improve the cooling system.
Refrigerant with high temperatures
may flow through these areas,
resulting in hot surfaces on the side
walls. This is normal and does not
need any servicing. Please pay
attention while touching these
areas.
Refrigerator / User manual

4.4. Attaching the plastic wedges

Use the plastic wedges in the provided
with the product to provide sufficient space for
air circulation between the product and the
wall.
1. To attach the wedges, remove the screws
on the product and use the screws
provided with the wedges.
2. Attach 2 plastic wedges on the ventilation
cover as shown in the figure.
11 / 20 EN