Maintenance
Maintenance
Inspect the dispense valve, material, and air
hoses at least once every two weeks. Inspect
for leakage and other visible damage.
Task
Inspect for leaks
*Check hoses for wear
*Check/tighten fluid connections
*Check/tighten air connections
Check stroke adjustment
Lube packings
* Assumes movement from automation.
Task
Check cables for wear
Verify cable connections
Verify resistance of electric heaters
Verify resistance of RTD sensors
12
Table 1: Mechanical
Table 2: Electrical
The following tables list recommended mainte-
nance procedures and frequencies. The main-
tenance is divided between mechanical and
electrical tasks. A typical application is a valve
mounted on a robot dispensing a moderately
abrasive sealant.
Monthly or
30,000
Weekly
cycles
Weekly
Monthly
3A1792A