Graco DV Series Instructions-Parts List Manual page 4

Warnings
FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode.
To help prevent fire and explosion:
Use equipment only in well ventilated area.
•
Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps,
•
and plastic drop cloths (potential static arc).
Keep work area free of debris, including solvent, rags and gasoline.
•
Do not plug or unplug power cords, or turn power or light switches on or off when
•
flammable fumes are present.
Ground all equipment in the work area. See Grounding instructions.
•
Use only grounded hoses.
•
Hold gun firmly to side of grounded pail when triggering into pail.
•
If there is static sparking or you feel a shock, stop operation immediately. Do not
•
use equipment until you identify and correct the problem.
Keep a working fire extinguisher in the work area.
•
ELECTRIC SHOCK HAZARD
This equipment must be grounded. Improper grounding, setup, or usage of the system
can cause electric shock.
Turn off and disconnect power at main switch before disconnecting any cables and
•
before servicing or installing equipment.
Connect only to grounded power source.
•
All electrical wiring must be done by a qualified electrician and comply with all local
•
codes and regulations.
TOXIC FLUID OR FUMES HAZARD
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin,
inhaled, or swallowed.
Read MSDSs to know the specific hazards of the fluids you are using.
•
Store hazardous fluid in approved containers, and dispose of it according to
•
applicable guidelines.
4
WARNING
WARNING WARNING WARNING
3A1792A