Unpacking; Operation - Scheppach C-HT570-X Instruction Manual

Protection category
Subject to technical changes!
Noise and vibration
WARNING
Noise can have serious effects on your health. If the
machine noise exceeds 85 dB, please wear suitable
hearing protection for you and persons in the vicinity.
The noise and vibration values have been determined in
accordance with EN 62841-1.
Noise data
Sound pressure L
pA
Measurement uncertainty K
Sound power L
wA
Measurement uncertainty K
Guaranteed sound power
Vibration parameters
Vibration a front handle
h
Vibration a rear handle
h
Measurement uncertainty K
The total vibration emission values specified and the de-
vice emissions values specified have been measured in
accordance with a standardised test procedure and can
be used for comparison of one electric tool with another.
The total noise emission values specified and the total vi-
bration emission values specified can also be used for an
initial estimation of the load.
WARNING
The noise emission values and vibration
emission value can vary from the specified
values during the actual use of the power
tool, depending on the type and the manner
in which the electric tool is used, and in par-
ticular the type of workpiece being pro-
cessed.
Try to keep the stress as low as possible. For example:
Limit working time. In doing so, all parts of the operating
cycle must be taken into account (such as times in
which the power tool is switched off or times in which it
is switched on, but is not running under a load).
7

Unpacking

WARNING
The product and the packaging material are not
children's toys!
Do not let children play with plastic bags, films or
small parts! There is a danger of choking or suffo-
cating!
• Open the packaging and carefully remove the product.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
IPX0
73 dB
3 dB
pA
93 dB
3 dB
wA
96 dB
2.96 m/s
2.72 m/s
1.5 m/s
www.scheppach.com
• Check the product and accessory parts for transport
damage. Immediately report any damage to the trans-
port company that delivered the Product. Later claims
will not be recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating manual before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Spare parts
can be obtained from your specialist dealer.
• When ordering please provide our article number as
well as type and year of manufacture for the product.
8

Operation

The cordless hedge trimmer is equipped with high-quality
blades made of special laser-cut steel. The cutting teeth
move back and forth linearly during the cutting process.
The impact protection at the tip of the cutter bar prevents
unpleasant kickbacks when coming into contact with
walls, fences, etc.
2
To protect the user, the product has a two-hand safety
switch and a quick-stop brake function. The hand guard
2
also protects against branches and twigs.
2
WARNING
Danger of injury!
Remove the battery from the power tool before carrying
out any work on the power tool (e.g. maintenance, tool
change, etc.) and when transporting and storing it.
There is a risk of injury if the on/off switch is operated
unintentionally.
WARNING
Danger of injury!
The on/off switch and the safety switch must not be
locked!
– Do not work with the product if the switches are
damaged. The on/off switch and the safety switch
must switch off the product when released.
– Make sure the product is in working order before
each use.
WARNING
Wear suitable clothing and work gloves when
working with the product.
Always wear eye protection and hearing pro-
tection.
Negligent use of personal protective equipment (PPE)
Careless use or omission of personal protective equip-
ment may result in serious injury.
GB | 19