Technical Data; Unpacking; Operation - Scheppach C-HTGS200-X Instruction Manual

6

Technical data

Cordless grass & hedge trimmer
Engine voltage
Idle speed n
0
Grass cutting blade width
Hedge cutting blade cutting length
Weight (without battery, with both sets
of blade and saw chain)
Subject to technical changes!
Noise and vibration
WARNING
Noise can have serious effects on your health. If the
machine noise exceeds 85 dB, please wear suitable
hearing protection for you and persons in the vicinity.
The noise and vibration values have been determined in
accordance with EN 62841-1.
Noise data
Grass cutting blade
Sound pressure L
pA
Sound power L
wA
Measurement uncertainty K
Hedge cutting blade
Sound pressure L
pA
Sound power L
wA
Measurement uncertainty K
Vibration parameters
Vibration a Grassing cutting blade
h
Vibration a Hedge cutting blade
h
Measurement uncertainty K
The total vibration emission values specified and the de-
vice emissions values specified have been measured in
accordance with a standardised test procedure and can
be used for comparison of one electric tool with another.
The total noise emission values specified and the total vi-
bration emission values specified can also be used for an
initial estimation of the load.
WARNING
The noise emission values and vibration
emission value can vary from the specified
values during the actual use of the power
tool, depending on the type and the manner
in which the electric tool is used, and in par-
ticular the type of workpiece being pro-
cessed.
Try to keep the stress as low as possible. For example:
Limit working time. In doing so, all parts of the operating
cycle must be taken into account (such as times in
which the power tool is switched off or times in which it
is switched on, but is not running under a load).
18 | GB
C-HTGS200-X
20 V
1200
90 mm
200 mm
0.96 kg
78.9 dB
86.9 dB
3 dB
wA
75.8 dB
83.8 dB
3 dB
wA
1.309 m/s
2.553 m/s
1.5 m/s
www.scheppach.com
7

Unpacking

WARNING
The product and the packaging material are not
rpm
children's toys!
Do not let children play with plastic bags, films or
small parts! There is a danger of choking or suffo-
cating!
• Open the packaging and carefully remove the product.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
damage. Immediately report any damage to the trans-
port company that delivered the Product. Later claims
will not be recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating manual before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Spare parts
can be obtained from your specialist dealer.
• When ordering please provide our article number as
well as type and year of manufacture for the product.
8

Operation

The cordless grass & hedge trimmer is a combination
product with two interchangeable cutting devices. When
used as a hedge shear (hedge trimmer), a hedge cutting
blade is used as the cutting device. For safety reasons,
the teeth are rounded horizontally and offset to reduce the
danger of injury. When used as grass shears, a grass cut-
2
ting blade with several teeth is used as the cutting device.
2
WARNING
2
Danger of injury!
Remove the battery from the power tool before carrying
out any work on the power tool (e.g. maintenance, tool
change, etc.) and when transporting and storing it.
There is a risk of injury if the on/off switch is operated
unintentionally.
WARNING
Electric shock and damage to the product
possible!
Contact with a live cable during cutting can result in
electric shock. Cutting into foreign objects can cause
damage to the cutter bar.
– Scan hedges and bushes for hidden objects, such
as live wires, wire fences and plant supports, before
cutting
ATTENTION
Make sure that the ambient temperature does not ex-
ceed 50°C and does not fall below -20°C during work.