Advertisement
2.1
Transport mode
2.2
Diagnostics connector
2.3
Unpacking and setting up the vehicle
This vehicle was blocked for transport in the software.
To operate the vehicle, the vehicle electronics must be enabled.
This process is conducted during initial setup in KTM Dealer.net.
Enabling ensures that the initial setup in KTM Dealer.net is docu-
mented.
Enabling can be performed either temporarily, e.g. for a test ride,
or permanently for vehicle handover.
Info
Make sure that the vehicle is permanently enabled before
H02713-01
handing it over to the customer.
Diagnostics connector
F01981-10
–
Remove the straps and the box.
F01037-10
–
Remove the adhesive tape in the upper area of the motorcycle.
F02125-01
1
is located under the battery cover.
SETUP 2
3
Advertisement
