3 WORK
3.3
3.4
3.5
10
Mounting the passenger seat
401680-10
Removing the front rider's seat
M00856-10
Mounting the front rider's seat
401704-10
–
Hook holding lugs of the passenger seat into the bushings on
the subframe, lower the front, and simultaneously push back-
ward.
–
1
Insert locking pin
into the lock housing and push down the
front of the passenger seat until the locking pin engages with
an audible click.
Warning
Danger of accidents The seat can come loose from the
anchoring if it is not mounted correctly.
–
After assembly, check whether the seat is correctly
locked and cannot be pulled up.
–
Finally, check that the passenger seat is correctly mounted.
Preparatory work
–
Remove the passenger seat. (
Main work
–
Lift the rider's seat back and unhook in the
Main work
–
Attach the recesses on the front rider's seat to the fuel tank at
the desired seat position
seat forward while lowering it at the rear.
–
Finally, check that the front rider's seat is correctly mounted.
Finishing work
–
Mount the passenger seat. (
p. 9)
A
area.
A
B
or
, and push the front rider's
p. 10)