Software Configuration (If Applicable); Energize Loads And Battery Connections; Operation: Front Display Panel (Not Applicable); Operation: Graphical User Interface - ICT DIN Series Instruction Manual

2.14 Software Configuration (if applicable)

Applicable when ICT DIN Series Power Supply is used with ICT DIN Series
Power Distribution Unit.

2.15 Energize Loads and Battery Connections

1. De-energize the unit to allow safe modification of the connections;
connect the loads; re-energize the unit to energize the loads.
2. Switch on the external battery breaker or disconnect switch to
connect the backup battery string to the system.
3.0 OPERATION: FRONT DISPLAY PANEL (not
applicable)

4.0 OPERATION: GRAPHICAL USER INTERFACE

Combined with the ICT DIN Series Power Distribution Unit (ICT-DIN-PDU6),
remote monitoring and control is available using a secure, easy-to-use
Graphical User Interface (GUI) shown below. Refer to Section 4.0 of the ICT
DIN Series Power Distribution Unit manual for a detailed operation of the
GUI.

5.0 OPERATION: PARALLEL (not supported)

855-361-000_Rev2.0_Instruction Manual
ICT DIN Series Power Supply
Page 10 of 17