Table 2. Power Supply Ratings
Model
ICT360-48DIN
ICT360-24DIN
1.1 Features
•
108–264 VAC input
•
360-watt 48- or 24-volt DC output
•
90 to 91% efficiency
•
−30°C to +60°C operating range
•
Integrated battery charging and low voltage disconnect
•
Dual load connectors for installation flexibility
•
Temperature compensated battery charging (lead-acid battery
only)
•
Support for lead-acid and lithium-ion battery types
•
Adjustable battery charge current
•
Form-C alarm contacts
•
Serial communication port for remote monitoring when used with
ICT DIN Series Power Distribution Unit
2.0 INSTALLATION
The following is the recommended sequence for the installation process.
2.1 Unpacking and Inspection
Perform a physical check of the unit as it is being taken out of the box to
ensure it has not been damaged during shipping. Check that the system
configuration matches the version ordered, and that the accessories under
the package contents section were shipped with the unit.
NOTE: In case of shipping damage, your freight carrier should be notified
immediately.
2.2 Package Contents
•
Power supply
•
Instruction Manual (in bag)
•
Removable 3-pin AC input wire clamp connector plug (in bag)
•
Removable 5-pin form-C alarm and temperature sensor wire
clamp connector (in bag)
•
Removable 6-pin DC output wire clamp connector for output load
and battery input (in bag)
•
RJ11 data cable
855-361-000_Rev2.0_Instruction Manual
Output Voltage (V)
55.2
27.6
ICT DIN Series Power Supply
Max Output
Current (A)
7.5
15
Continuous
Current (A)
6.5
13
Page 2 of 17