Yamaha PLG150-AN Owner's Manual page 88

• The following information pertains only to the Plug-in Editor.
This is used for inserting the edited AN voice data to a song track in host application.
(This is affected also by the
tings.) By inserting appropriate bulk dump at appropriate points in a song, you can have
the AN voice change automatically as needed. Keep in mind that this is possible only
when the "1 Voice" setting is selected in the
"User Voice" or "User Step SEQ" is selected, you should insert the data to the very
beginning of the song (before any note data) as Bulk Data.
Keyboard shortcut: [Alt], [U], [I]
• "Insert AN Bulk Dump Data" can also be selected from the toolbar.
• Track
This determines the track to which the AN parameter settings will be inserted. Generally,
you should use the same track number for all parameter inserts, and make sure that no
other data is contained in the track.
• Measure / Beat / Clock
This determines the precise location in the track to which the parameter settings will be
inserted. You can specify the Measure (Meas), Beat, and Clock.
• OK
Click this to insert the current parameters at the specified location.
• Cancel
Click this to abort the operation.
Setup Menus /
Insert AN Bulk Dump Data
AN Expert Editor Setup
88
Insert AN Bulk Dump Data
/ Insert & Transmit Method
Insert & Transmit Method
set-
parameter. When