Table of Contents
Advertisement
Initializing an AN Voice to the Default Settings
This function allows you to reset all the parameters of the selected voice to the factory
"initial voice" default values. This gives you a "blank slate" from which you can create
your own voice.
Keep in mind that this operation automatically erases all the settings of the selected
voice. If you wish to save the voice for future recall, use the
z Select "AN Voice List."
Click the VOICE button at the bottom right of the main control panel.
You can also quickly call up this dialog box by right-clicking any inactive part of the
window (on the Macintosh, click while holding the CONTROL key) and clicking "AN
Voice List" in the pop-up menu. Or, you can click "Edit" on the menu bar, then
select "AN Voice List." (Keyboard shortcut: [Alt], [E], [V].)
x Select the User bank and the desired voice to be initialized.
Click on the User bank button, then click on the desired voice.
c Initialize the voice.
Click the "Voice Init" button in the dialog box. The specified voice is initialized and
automatically selected for editing.
To return to the main control panel window, close the dialog box (click the close but-
ton). (You can also do this by clicking anywhere on the main control panel.)
• If you want to initialize all User voices, then click on the "INIT ALL" button in the
window.
Operations /
Initializing an AN Voice to the Default Settings
7
Store
and
Save
functions.
AN Librarian
Advertisement
Table of Contents
