This convenient feature lets you change the display of the main control panel to indicate
the current status of certain signal routings within the PLG150-AN. When one of the
options is enabled (a check mark appears), color-coded highlights, arrows and lines
appear to show how the relevant blocks and parameters affect each other. Any or all of
the three options below can be enabled.
• Main Signal Flow
When this is checked, the signal flow of the main blocks (e.g., VCO blocks into MIXER,
MIXER into VCF, etc.) is shown.
• Oscillator Sync Routing
When this is checked, the master/slave relationship of the
shown.
• FM Routing
When this is checked, the modulation routing of the
• Although the AN Display Option can also be selected from the
use this slightly quicker, more convenient way of changing the display: Open the AN Display
Option box in the conventional way (from the Setup menu), and drag the box to an open space
on the screen. Then, when you want to change the setting, simply move the cursor to the box
and click --- the display changes instantly to your preference.
AN Display Option
84
Setup Menus /
Oscillator Sync feature
FM feature
is shown.
master
menu, you may want to
AN Display Option
is