Table of Contents
Advertisement
• Ctrl (Control) Source
Settings: Off, CC No. 1 - 95, After Touch, Pitch Bend, Key Track, Velocity,
Key Random, Mod Wheel, Foot Vol, Foot Ctrl, Foot Sw, Ribbon X, Ribbon Z,
AN AC 1 - 8
This determines which MIDI controller is assigned to control the corresponding
ter. You can set the source by Control Change number or by controller name, as
described below. Special Key Track and Key Random controllers are included for added
flexibility.
Off
No controller assigned.
CC No. 1 - 95
Selects the Source controller according to Control Change number, when received by
incoming MIDI messages.
After Touch
For controlling with keyboard After Touch.
Pitch Bend
For controlling with a Pitch Bend wheel.
Key Track
For controlling with note number messages generated by pressing the keys. Higher
keys result in higher controller values.
Velocity
For controlling with keyboard velocity, or the strength with which you strike the keys.
Key Random
For this setting, a random note number messages is automatically generated for each
key you press, or for each MIDI note message received.
Mod Wheel
For controlling with the Modulation Wheel, and/or by incoming MIDI messages of Con-
trol Change number 1.
Foot Volume
For controlling with a connected Foot Volume controller, and/or by incoming MIDI mes-
sages of Control Change number 7.
Foot Control
For controlling with a connected foot controller, and/or by incoming MIDI messages of
Control Change number 4.
Footswitch
For controlling with a connected Footswitch, and/or by incoming MIDI messages of
Control Change number 64.
Ribbon Controller-X (for AN1x data compatibility)
For controlling with X-axis motion on a ribbon controller (left-right), and/or by incoming
MIDI messages of Control Change number 13. When Ribbon Controller-X is used, the
control change (default of 13) is treated as a "Center-Base-Controller" (center = 64).
Parameters /
Setup Detail Parameter Window
54
Parame-
Advertisement
Table of Contents
