Yamaha PLG150-AN Owner's Manual page 70

• STORE
The Store function allows you to store your original Step Sequencer patterns to one of
the User memory locations for future recall. A maximum of 128 User Patterns can be
stored.
• When this operation is executed, the stored User Pattern bulk data is transmitted to the
PLG150-AN.
• User patterns can be stored with User voice data as AN Expert Data file (***.ANS).
• If the pattern is not stored as a User pattern, it will be stored as a Voice pattern to a User voice
(with the Voice Store function in the main control panel).
• The User Pattern data of the PLG150-AN is lost when the "mother" device is turned off. In
order to store User patterns on a Modular Synthesis Plug-in System compatible instrument
that have been edited/created with the computer-based AN Expert Editor (or with the compat-
ible instrument itself), you'll need to use an external memory device, such as a memory card.
For details, refer to the owner's manual of your Modular Synthesis Plug-in System compatible
instrument.
1) Click the STORE button.
2) From the Pattern Store dialog box, click the desired User number (001
... 128).
3) Click "OK" to execute the operation.
• NOTE NO. (Note Number) Bank
Range: C-2 ... G8 (MIDI note numbers 0 ... 127)
This bank of 16 virtual "knobs" lets you set the note number for each step of the Step
Sequencer pattern. To set the note, adjust the parameter normally by "turning" the appropri-
ate knob, or click on the value window above the knob to call up the pop-up value list, and
click the desired note number. Keep in mind that if you use one of the "Note Shift" settings (in
Keyboard Mode), the actual note is shifted as you play the MIDI keyboard.
• VELOCITY Bank
Range: Rest, 1 ... 127
This bank of 16 virtual "knobs" lets you set the note velocity for each step of the Step
Sequencer pattern. To set the velocity, adjust the parameter normally by "turning" the
appropriate knob, or move the cursor to the value window above the knob and use the
right/left mouse buttons to step up or down through the available values, or enter the
value directly from the computer keyboard. When set to "Rest," a rest (no sound) is
inserted for the step. Keep in mind that the final velocity of the entire pattern is also
determined by the Common
• GATE TIME Bank
Range: 1 ... 200%
This bank of 16 virtual "knobs" lets you set the gate time (or note length) for each step of
the Step Sequencer pattern. To set the gate time, adjust the parameter normally by
"turning" the appropriate knob, or move the cursor to the value window above the knob
and use the right/left mouse buttons to step up or down through the available, or enter
the value directly from the computer keyboard. Keep in mind that the final gate time of all
the notes in the pattern is also determined by the Common
Parameters /
VELOCITY control.
70
PATTERN GENERATOR Window
Gate Time control.