Yamaha PLG150-AN Owner's Manual page 16

Transmit AN Bulk Dump Data
This is the same as the corresponding command in the Setup menu. It lets you transmit
the current AN Expert Editor settings as MIDI data to the PLG150-AN board. (See Setup
Menus, Transmit AN Bulk Dump
Extract AN Bulk Dump Data (Plug-in Editor only)
This is the same as the corresponding command in the Setup menu. It lets you import
the bulk data of AN voice or Step Sequencer patterns in the sequenced song data to the
AN Expert Editor. (See Setup Menus,
Receive AN1x Bulk Dump Data
This is the same as the corresponding command in the Setup menu. It lets you receive
the voice or Step Sequencer settings from a connected AN1x Control Synthesizer as
MIDI data. (See Setup Menus,
Record (Plug-in Editor only)
This allows you to record your edit moves to a track, creating dynamic changes in the AN
voice as the song plays. (See
• Depending on your particular host application, certain operation steps may differ and/or this
function may not be available.
• LCD Display
This virtual "LCD" functions just like the display on an actual synthesizer's front panel.
Indicates the current voice's bank/number
as well as its category and name.
Indicates the currently selected parameter's value or setting.
By clicking on this third line, you can also directly change the
value by typing it on the computer keyboard. (See
keyboard.)
Parameters /
Data.)
Extract AN Bulk Dump
Receive AN1x Bulk Dump
Recording Within the AN Expert
16
AN Expert Editor Main Window
Data.)
Data.)
Editor.)
Full name of the currently
selected parameter.
Computer