Preparing Your System Preparing Your System Thank you for purchasing a Puretec quality product. Puretec systems are designed to run economically for many years, dependent on the initial installation and periodical maintenance. Please read all instructions carefully as failures caused by incorrect installation or operation are not covered by warranty.
(filters are blocked with sediment and other containments) or bad taste and odour return. You can obtain replacement cartridges from your local Puretec dealer. To maintain performance standards and system warranty, use only genuine Puretec replacements.
11. If leaks occur, repeat the steps to check cartridge alignment and bowl O-rings. If leaks persist, turn the inlet and outlet shut off valves to the CLOSE position and the bypass isolation to the OPEN position and call Puretec on 1300 140 140 (AU) or 0800 130 140 (NZ).
Puretec’s discretion, including chargeable inspection and labour costs incurred. Warranty/Australia This warranty is given by Puretec Pty Ltd, ABN 44 164 806 688, 37-43 Brodie Road, Lonsdale SA 5160, telephone no. 1300 140 140 and email at sales@puretec.com.au.
Need help?
Do you have a question about the FilterWall IMF2 Series and is the answer not in the manual?
Questions and answers