Table of Contents
Advertisement
C300 User Guide
C
harging
Charging the battery of the C300
1. Plug the USB type C plug of the USB cable included in the delivery into the USB type C port on the
C300.
2. Plug USB type A plug at the other end of the cable into the USB type A port of a power source (for
example, a PC). While the C300 is charging, its power LED indicator flashes white.
Note: If the C300 is playing audio from a Bluetooth device, it will switch to playing audio
from the PC once the PC is connected via USB cable.
Using the C300 to charge an external device
1. Plug the USB type A plug of the USB cable included in the delivery into the USB type-A port of the
C300.
2. Plug the USB type C plug at the other end of the cable into the USB type C port of the external
device.
Note:
•
The C300 must be on and the battery must not be low.
•
You can charge the batteries of the C300 and a connected external device at the same time
(second USB cable not included in delivery).
Checking the battery level of the C300
Press
briefly. The circle LEDs turn blue one by one to indicate the battery charge level, then off
after two seconds. The more blue LEDs displayed, the higher the battery charge level. For example,
if the battery is 50% charged, circle LEDs 1 to 4 will turn on one after the other, then off after two
seconds.
1 LED:
12.5% charged
2 LEDs:
25 % charged
4 LEDs:
50 % charged
6 LEDs:
75 % charged
8 LEDs:
100 % charged
Low battery warning
The circle LEDs flash and the C300 beeps rapidly every 3 minutes.
16
Using the C300
Advertisement
Table of Contents
