Maintenance; Recommended Maintenance Schedule(S) - Toro Groundsmaster e3200 Operator's Manual

Maintenance

Note:
Determine the left and right sides of the machine from the normal operating position.
Note:
Download a free copy of the electrical or hydraulic schematic by visiting www.Toro.com and searching
for your machine from the Manuals link on the home page.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first hour
After the first 10 hours
After the first 50 hours
After the first 1000 hours
Before each use or daily
Every 50 hours
Every 200 hours
Every 250 hours
Every 500 hours
Every 800 hours
Every 1,000 hours
Every 2,000 hours
Yearly
Every 2 years
Maintenance Procedure
• Torque the wheel lug nuts.
• Torque the wheel lug nuts.
• Change the axle oil.
• Change the hydraulic fluid.
• Change the hydraulic filter.
• Check the air pressure in the tires.
• Check the interlock system.
• Check the hydraulic-fluid level.
• Grease the bearings and bushings.
• Torque the wheel lug nuts.
• Check the axle-oil level.
• Change the axle oil.
• Change the hydraulic fluid (if you are not using the recommended hydraulic fluid or
have ever filled the hydraulic tank with alternative fluid).
• Change the hydraulic filter (if you are not using the recommended hydraulic fluid or
have ever filled the hydraulic tank with alternative fluid).
• Change the hydraulic filter (if you are using the recommended hydraulic fluid).
• Change the hydraulic fluid (if you are using the recommended hydraulic fluid).
• Remove debris from the electrical compartment (yearly or as needed).
• Replace moving hoses.
42