2.
Press the lift switch to raise the cutting unit to
the T
position.
RANSPORT
3.
Shut off the machine, remove the key, ensure
that the parking brake is engaged, and turn the
battery-disconnect switch to the O
4.
Remove the pins from the height-of-cut plates
(Figure
31).
Figure 31
1. Height-of-cut pins
5.
Rotate the cutting unit
latch engages with the tie-down bracket
33).
WARNING
The cutting unit is heavy.
Use assistance when you lift the cutting
unit.
position.
FF
g371944
2. Height-of-cut plates
(Figure
32) so that the
(Figure
Rotating the Cutting Unit to the
T
Position
RANSPORT
Perform this procedure to rotate the cutting unit from
the S
position to the T
ERVICE
1.
Release the cutting-unit latch from the tie-down
bracket
(Figure
slightly forward (refer to
the latch handle forward.
37
Figure 32
Figure 33
position.
RANSPORT
34) by rotating the cutting unit
Figure
32) and pulling
g369190
g298276