Toro Groundsmaster e3200 Operator's Manual page 6

Safety-alert symbol
The safety-alert symbol appears above information
that alerts you to unsafe actions or situations and
is followed by the word DANGER, WARNING, or
CAUTION.
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious
injury.
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
This manual uses two other words to highlight
information. Important calls attention to special
mechanical information and Note emphasizes general
information worthy of special attention.
General Safety
This product is capable of amputating hands and
feet and of throwing objects. Always follow all safety
instructions to avoid serious personal injury.
•
Do not operate the machine without all guards
and other safety protective devices in place and
functioning properly on the machine.
•
Keep your hands and feet away from rotating
parts. Keep clear of the discharge opening.
•
Never allow children to operate the machine.
•
Shut off the machine, remove the key, turn the
battery-disconnect switch to the O
wait for all movement to stop before you leave
the operator's position. Allow the machine to cool
before adjusting, servicing, cleaning, or storing it.
Operation Safety
•
The owner is responsible for training all operators.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
This product generates an electromagnetic field.
If you wear an implantable electronic medical
device, consult your health care professional
before using this product.
•
Shut off the machine, remove the key, and wait
for all movement to stop before you leave the
operator's position. Turn the battery-disconnect
Figure 2
position, and
FF
switch to the O
to cool before adjusting, servicing, cleaning, or
storing it.
g000502
•
Know how to stop and shut off the machine quickly.
•
Check that operator-presence controls, safety
switches, and guards are attached and functioning
properly. Do not operate the machine unless they
are functioning properly.
•
Before mowing, always inspect the machine to
ensure that the blades, blade bolts, and cutting
assemblies are in good working condition.
Replace worn or damaged blades and bolts in sets
to preserve balance.
•
Inspect the area where you will use the machine
and remove all objects that the machine could
throw.
•
The owner/operator can prevent and is responsible
for accidents that may cause personal injury or
property damage.
•
Wear appropriate clothing, including eye
protection; long pants; substantial, slip-resistant
footwear; and hearing protection. Tie back long
hair and do not wear loose clothing or loose
jewelry.
•
Before you start the machine, ensure that all drives
are in neutral and you are in the operating position.
•
Do not carry passengers on the machine.
•
Operate the machine only in good visibility to avoid
holes or hidden hazards.
•
Avoid mowing on wet grass. Reduced traction
could cause the machine to slide.
•
Keep your hands and feet away from rotating
parts. Keep clear of the discharge opening.
•
Look behind and down before backing up to be
sure of a clear path.
•
Use care when approaching blind corners, shrubs,
trees, or other objects that may obscure your
vision.
•
Stop the blades whenever you are not mowing.
•
Stop the machine, remove the key, and wait for
all moving parts to stop before inspecting the
attachment after striking an object or if there is
an abnormal vibration in the machine. Turn the
battery-disconnect switch to the O
and make all necessary repairs before resuming
operation.
•
Slow down and use caution when making turns
and crossing roads and sidewalks with the
machine. Always yield the right-of-way.
•
Disengage the drive to the cutting unit, shut off
the machine, remove the key, and wait for all
movement to stop before adjusting the height of
6
position and allow the machine
FF
FF
position