Toro Groundsmaster e3200 Operator's Manual page 19

2-wheel drive traction unit

Hide thumbs Also See for Groundsmaster e3200:

Table of Contents

1. Nut

2. Bolt

Perform the following steps to secure the hydraulic cylinders to the lift arms:

Use the display screen to ensure that the counterbalance setting is set to O

Use a drift punch to align the cylinder rod holes with the lift-arm holes

Note:

Fully raise the lift arm to help with the alignment.

1. Bolt (3/8 x 1-1/4 inches)

2. Small pin

Use 2 bolts (3/8 x 1-1/4 inches), 2 nuts (3/8 inch), and 2 small pins to secure the lift arms to the

cylinders

(Figure

Grease the attachment pin joints and lift-arm pin joints; refer to

(page

45).

7).

Figure 6

3. Large pin

Figure 7

3. Cylinder rod

4. Nut (3/8 inch)

Greasing the Bearings and Bushings

(Figure

7).

g432918

g432920

Table of Contents

31800