Table Of Contents - Toro Groundsmaster e3200 Operator's Manual

This product complies with all relevant European
directives; for details, please see the separate product
specific Declaration of Conformity (DOC) sheet.
WARNING
CALIFORNIA
Proposition 65 Warning
The power cord on this product contains
lead, a chemical known to the State
of California to cause birth defects
or other reproductive harm. Wash
hands after handling.
Battery posts, terminals, and related
accessories contain lead and lead
compounds, chemicals known to
the State of California to cause
cancer and reproductive harm. Wash
hands after handling.
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Introduction
This machine is a ride-on, rotary-blade lawnmower
intended to be used by professional, hired operators
in commercial applications. It is designed primarily for
maintaining grass on well-maintained lawns in parks,
sports fields, and on commercial grounds. Using this
product for purposes other than its intended use could
prove dangerous to you and bystanders.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit www.Toro.com for product safety and operation
training materials, accessory information, help finding
a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Important:
With your mobile device, you can
scan the QR code on the serial number decal (if
© 2024-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
equipped) to access warranty, parts, and other
product information.
Model No.
Serial No.
Contents
Safety ....................................................................... 4
General Machine Safety Warnings...................... 4
Additional Safety Messages ............................... 5
Safety and Instructional Decals ........................ 10
Setup ...................................................................... 15
1 Removing the Machine from the Shipping
Container ...................................................... 16
2 Installing the Rear Tires ................................. 16
3 Removing the Front Tires............................... 17
4 Installing the Lift-Arm Assembly ..................... 18
5 Installing the Front Tires................................. 20
6 Installing the Tie-Down Bracket...................... 20
7 Installing the Seat .......................................... 20
Figure 1
8 Installing the Steering Wheel.......................... 20
9 Installing the Bumper ..................................... 21
10 Adjusting the Roll-Bar Position ..................... 22
11 Installing the Cutting Unit.............................. 22
12 Installing a Plug to the Flying-Lead
Cord .............................................................. 23
2
Figure 1
Model and serial number location
Contact us at www.Toro.com.
g430134
Printed in the USA
All Rights Reserved