Toro Groundsmaster e3200 Operator's Manual page 34

Understanding the Display-Screen
Icons
Refer to the following table for a description of each
display-screen icon:
Display-Screen Icons
Next
Scroll up
Scroll down
Increase
Decrease
Access the menu.
Exit the menu.
Toggle a setting.
Reset
Hour meter
Operator is out of seat.
Parking brake is engaged
The parking brake automatically
engages when the machine is in
neutral or if the machine experiences
a power outage.
Neutral
PTO is engaged.
PTO is disabled.
Cruise control is engaged.
Cutting units are being lowered and
the cutting unit is in float.
Cutting units are being raised.
Fast
Slow
Display-Screen Icons (cont'd.)
Accessing the Protected Menus
Note:
The factory default PIN code for you machine
is "1234".
If you changed the PIN code and forgot the code,
contact your authorized Toro distributor for assistance.
1. Select the S
ETTINGS
2. Select the P
ROTECTED
3. To enter the PIN code, press the middle button
until the appropriate digit appears, then press
the right button to move to the next digit.
4. After all four digits are entered, press the middle
button to submit the PIN code.
If the PIN code has been entered correctly, the
PIN icon will appear at the top right of all menu
screens.
Understanding the Smart Power
Setting
•
Smart Power engaged: The machine saves
power during a light cutting load and increases
performance during a heavy cutting load. This
feature automatically controls the machine speed
and optimizes cutting performance.
•
Smart Power disengaged: The cutting-unit blade
speed is configured through the blade speed
screen, and the traction speed is not limited.
34
PIN passcode is entered; you can
access protected menu items or
configure protected settings.
Battery
Energy-saving
The traction speed or menu item is
locked.
Service due
Counterbalance is active.
Machine is charging.
Machine is not charging.
option.
M option.
ENUS