IBM eServer xSeries 255 Option Installation Manual page 70

58
IBM xSeries 255 Type 8685: Option Installation Guide
Release latch
3) Place the memory-board assembly on a static-protective surface.
b. Touch the static-protective package containing the new VRM to any
unpainted metal surface on the server; then, remove the VRM from the
package.
c. Attach the retainer clip to the VRM:
v If you are installing a VRM for microprocessor 1 or 2, remove the plastic
retainer clip from the package; then, attach the top of the plastic retainer
clip to the top of the VRM.
Note: Do not attach the plastic retainer clip to the VRM for
microprocessor 3 or 4.
Release latch
Velcro
tabs
Memory-board
airflow guide
(closed position)