IBM eServer xSeries 255 Option Installation Manual page 53

Cable-management
arm bracket
Cable-management
arm
Captive screw
1) Loosen the captive screw on the cable-management-arm bracket.
2) Slide the tab on the cable-management-arm bracket out of the slot on
the server; then, remove the bracket from the server.
b. Slide the server out of the rack enclosure until it locks into place.
4. Remove the top cover and bezel (see "Removing the top cover and bezel" on
page 15).
5. Remove the air baffle:
a. Pull out the two plastic fasteners on the front of the air baffle.
Note: Do not remove the fasteners from the air baffle.
b. Grasp the handle on the air baffle; then, lift the air baffle from the server.
Tab
Fan bay 7
(fan removed)
Chapter 2. Installing options
41