Special Functions; Saving Settings To Usb / Usb Backup - Telestar SATPLUS 4 Operating Instructions Manual

9. SPECIAL FUNCTIONS

9.1 Saving settings to USB / USB backup

Changes made to the device, such as changes to the satellite reception parameters, can be saved to a
USB data carrier.
This data can be uploaded to the measuring receiver again after a factory reset.
> Connect a USB data carrier to the device.
> Select the System settings menu item in the main menu using the arrow button and
confirm with OK.
> Select the Backup menu item and confirm with OK.
> Use the navigation buttons on the right/left to select the program list in the Backup mode line.
> Switch to the Start line and press OK.
The program data is written to the USB data carrier. After successful transfer to the USB flash drive, a
message appears which must be acknowledged by pressing the OK button.
29
EN
TELESTAR SATPLUS 4