First Commissioning - Telestar SATPLUS 4 Operating Instructions Manual

5. FIRST COMMISSIONING

5.2.1 System settings
If you are using the device for the first time, you may need to change the basic settings of the receiver;
you can make these basic settings in the Settings area.
> Use the navigation cross to select the System settings menu item and confirm with OK.
5.2.1 System settings
Language:
> Select the menu language here. You can choose between German, Italian, Spanish, Polish, Arabic,
Indonesian, English, French, Russian, Portuguese and Turkish.
Country:
> Select the country you are in here.
TV setting
> Here you can choose between the PAL and NTSC TV systems.
Video resolution
> Select the resolution of the device monitor and the resolution transmitted via HDMI here.
Choose between the standard resolutions 576p, 720p, 1080i and 1080p.
Format
> The various display formats can be set here.
GMT Difference
> Set the time zone for your location here. For Germany,
this difference is GMT+1 hour.
Beep tone
> An acoustic signal can be activated here during level measurement. The shorter the distance between
the beeps, the stronger the signal.
Flashlight
> Switch the LED on the back of the device on or off here.
PWR unit
> Specify here whether the signal measurement should be displayed in dBuv or dBmV.
The difference between dBmV and dBuV is that dBmV is measured in decibels relative to a
millivolt, while dBuV is measured in decibels relative to a microvolt.
Keyboard illumination
> The setting activates the keyboard backlighting.
Key tone
> An acknowledgement tone can be activated here when the buttons on the device are pressed.
13
EN
TELESTAR SATPLUS 4