Safety Instructions; Explanation Of Symbols - Telestar SATPLUS 4 Operating Instructions Manual

2. SAFETY INSTRUCTIONS

2.1 Explanation of symbols

SYMBOL
DANGER!
WARNING!
CAUTION!
NOTE!
Fig. 1
-
+
Fig. 2
-
+
MEANING
This signal word indicates a hazard with a high degree of risk
that will result in death or serious injury if the warning is ignored.
This signal word indicates a hazard with a medium level of risk
which, if not avoided, could result in death or serious injury.
This signal word indicates a hazard with a low level of risk which, if
not avoided, may result in minor or moderate injury.
This signal word warns of possible material damage.
This symbol warns of danger.
Protection class II
Electrical appliances with protection class II have reinforced or
double insulation at the level of the rated insulation voltage
between active and touchable parts (VDE 0100 Part 410, 412.1).
They usually have no connection to the protective conductor. Even
if they have electrically conductive surfaces, these are protected
from contact with other live parts by reinforced or double
insulation.
The products marked with this symbol fulfill the requirements of the
European Community directives.
For devices with hollow plugs, these symbols indicate the polarity
of the plug.
A distinction is made here between 2 variants
Fig 1: Outside plus/inside minus
Fig 2: Inside plus / outside minus
Appliances with this symbol may only be operated indoors in a
dry environment
5
EN
TELESTAR SATPLUS 4