Backing Up The Program List To A Usb Data Carrier - Telestar SATPLUS 4 Operating Instructions Manual

8. PROGRAM LIST

8.2 Backing up the program list to a USB data carrier

If you have changed the order of programs according to your wishes or deleted or added channels
from the list, you can save these changes to a USB data carrier so that you can restore this data to
the measuring receiver during a factory reset.
> Connect a USB data carrier to the device.
> Select the System settings menu item in the main menu using the arrow button and confirm
with OK.
> Select the Backup menu item and confirm with OK.
> Use the navigation buttons on the right/left to select the program list in the Backup mode line.
> Switch to the Start line and press OK.
The program data is written to the USB data carrier. After successful transfer to the USB stick, a
message appears which must be acknowledged by pressing the OK button.
27
EN
TELESTAR SATPLUS 4