Dvb-T/T2 - Dvb-C Measuring Range - Telestar SATPLUS 4 Operating Instructions Manual

7. DVB-T/T2 - DVB-C MEASURING RANGE

> To carry out a measurement in the DVB-T/T2 or DVB-C range, please select the DVB-T menu or
DVB-C menu item in the main menu and confirm with OK.
Please note in the DVB-T/T2 range:
If you have an active antenna that you operate on the device, you can activate an antenna supply voltage via the
device's coax input here.
Please also inform yourself about the technical specifications of your antenna.
> To do this, select the Antenna setting line and use the right/left navigation buttons to switch
the supply voltage on or off.
NOTE!
The supply voltage can be set between 5 volts, 12 volts and 24 volts.
Please also inform yourself about the technical specifications of your antenna.
> In the Channel line, select the frequency on which a measurement is to be carried out.
> Use the navigation buttons right/left to call up the channel list.
21
EN
TELESTAR SATPLUS 4