Telestar SATPLUS 4 Operating Instructions Manual page 48

4. DEVICE OVERVIEW
4.1 Control panel and connections
NO. DESCRIPTION
F3
13
14
AVS
Function Red
15
AUDIO
Function
16
Green TV/R
Function Orange
17
SAT
Blue function
18
SYS
19 STANDBY
20 Sat RF input
DVB-T/T2 /
21
DVB-C HF input
USB connection
22
23
HDMI Out
LAN connection
24
25
AV Out
26
DC Out
27
Optical connection
Voltage
28
Power supply
scope of delivery)
Calls up different functions depending on the operating mode.
Switches to external input source
Calls up various functions in the menu. Calls up
audio parameters.
Calls up various functions in the menu. Switches
between TV and radio mode.
Calls up various functions in the menu. Calls
up measurement parameters inSat reception.
Calls up various functions in the menu.
Switches the device on or off.
Antenna connection Satellite reception system
RF connection for measuring DVB-T/T2 or DVB-C signals.
USB connection for updating the device with a new
firmware and to save a station list, to save a channel list, to save a
Screenshots or to record a TV program.
HDMI output for outputting the screen content to an external monitor with
HDMI connection.
RJ 45 LAN interface
AV output for outputting the screen content to an external monitor
with an analog AV connection. (Adapter cable included in the scope
of delivery)
12 V voltage output for operating external devices with 12 V
power supply. (e.g. surveillance camera)
For power measurement of optical signals.
Connection of the external power supply unit or car power supply unit (included in the
11
FUNCTION
EN
TELESTAR SATPLUS 4