Telestar SATPLUS 4 Operating Instructions Manual page 49

4. DEVICE OVERVIEW
4.1 Control panel and connections
29
Loudspeaker
30
AV IN
EN
31
HDMI IN
LED
32
5.1 Introduction
With the TELESTAR SATPLUS 4, you are able to set up and align a satellite system optimally and easily. You
can also use the device to measure DVB-C and DVB-T/DVB-T2 signals. Before using the device for the first
time, the battery should be charged. The first charging process should take at least 4 hours. The measuring
receiver can also be charged when it is switched on.
> Connect the 230 V mains adapter to the mains adapter connection on the side of the device and
plug the mains adapter into a mains socket. the device is now charging. The CHG LED lights up.
> Switch the device on using the power button. During the boot process, all 4 control LEDs at
the top right light up. After the start logo, the device is ready for operation.
5.2 Menu
> Press the MENU button.
You can use the navigation cross to select all menu items in the menu. The selected menu item is
highlighted in color and you can call up the selected menu item by pressing the OK button. To exit the
menu, press the EXIT button. To go back one step in the menu, press the MENU button.
Operating
For connecting an external audio-video playback device, e.g.
surveillance camera with analog output.
For connecting an external audio-video playback device with HDMI
output.
Light for illumination in difficult lighting situations.
12