Dvb-S/S2 Measurement - Telestar SATPLUS 4 Operating Instructions Manual

6. SAT MEASURING RANGE
6.1 DVB-S/S2 default setting
DiSEqC 1.0 / 1.1
In these fields, use the navigation cross to set the satellite position that is controlled via DiSEqC. This setting
depends on the satellite reception system and the associated modules.
Tone Burst
Switch the tone burst here according to the connected satellite system. This setting depends on the satellite
reception system and the associated modules.
EN
LNB voltage
The LNB power supply (14/18V) can be switched on or off via this menu item.

6.2 DVB-S/S2 measurement

> Press the OK button during operation. The preset
program list is called up.
> Select a program on which a measurement is to be carried out and confirm with OK.
Operating
16