Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Chauvet DJ DERBY X
Summary of Contents for Chauvet DJ DERBY X
- Page 1 User Manual...
- Page 2 Derby X as of the release date of this edition. Trademarks Chauvet, Chauvet DJ, the Chauvet logo, and Derby X are registered trademarks or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies.
-
Page 3: Table Of Contents
Static Color......................Automatic Program .................... Program Speed ....................... Sound-Active Mode.................... Sound Sensitivity ..................... IRC-6 Infrared Remote Control ..............Master/Slave Mode ..................5. Maintenance..................Product Maintenance ..................6. Technical Specifications..............Contact Us....................Warranty & Returns..................Derby X User Manual Rev. 1... -
Page 4: Before You Begin
Important installation or configuration information. The product may not function correctly if this information is not used. Useful information. Derby X User Manual Rev. 1... -
Page 5: Safety Notes
Before You Begin Safety Notes These Safety Notes include important information about installation, use, and maintenance of the Derby X. ■ ALWAYS: ♦ Connect to a grounded circuit. ♦ Connect to operating voltages as specified on the product's spec sticker. -
Page 6: Introduction
Product Overview Name Name LED display Power out Menu buttons Power in IR sensor DMX in/out Safety loop Fuse holder Product Dimensions 7.4 in 187 mm 11.9 in 15 in 382 mm 302 mm Derby X User Manual Rev. 1... -
Page 7: Setup
3. Setup AC Power The Derby X has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. -
Page 8: Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The Derby X may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and programming. -
Page 9: Operation
Turns infrared on or off Mode DMX Configuration The Derby X works with a DMX controller. Information about DMX is in the Chauvet DMX Primer, which is available from the Chauvet website chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf. Personality and Starting Address The Derby X uses 8 DMX channels in DMX mode, which defines the highest recommended address to 505. -
Page 10: Dmx Channel Assignments And Values
165 178 Automatic program 12 179 192 Automatic program 13 193 206 Automatic program 14 207 220 Automatic program 15 221 250 Automatic program 16 251 255 Sound-active mode Derby X User Manual Rev. 1... -
Page 11: Standalone Configuration
DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller. Static Color To run the Derby X with a static color, follow the instructions below. 1. Press <MENU> repeatedly until C--- shows on the display. 2. Press <ENTER>. -
Page 12: Irc-6 Infrared Remote Control
Operation IRC-6 Infrared Remote Control The Derby X is compatible with the IRC-6 infrared remote control from Chauvet. To enable or disable IRC-6 functionality, do the following: 1. Press <MENU> repeatedly until SEt shows on the display. 2. Press <ENTER>. -
Page 13: Master/Slave Mode
The Master/Slave mode allows a single Derby X product (the “master”) to control the actions of one or more Derby X products (the “slaves”) without the need of a DMX controller. The master product will be set to operate in either standalone mode or with the IRC-6, while the slave products will be set to operate in slave mode. -
Page 14: Maintenance
6. Softly drag any dirt or grime to the outside of the transparent surface. 7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Derby X User Manual Rev. 1... -
Page 15: Technical Specifications
Coverage Angle 0 to 26 Hz 96° Thermal Maximum External Temperature Cooling System 104 °F (40 °C) Convection I/O Connector Channel Range 3-pin XLR Ordering Product Name Item Code UPC Number Derby X 07051546 781462218942 Derby X User Manual Rev. 1... -
Page 16: Contact Us
For warranty terms and conditions and return information, please visit our website. For customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration. For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-registration. Derby X User Manual Rev. 1...