Download
Share
Print this page
Raytec URBAN Installation Manual
  1. Manuals
  2. Brands
  3. Raytec Manuals
  4. Lighting Equipment
  5. URBAN
  6. Installation manual

Raytec URBAN Installation Manual

Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
URBAN
Linear Range - Installation Guide
This installation guide provides instructions for installing URBAN series of industrial
luminaires.
Text in italics is specific for emergency variants.
Overview
Important information
The URBAN series of industrial luminaires are specialist devices, for use in specific
operating environments.
The units must be installed in accordance with these instructions and must be installed by
suitably qualified personnel.
If you have any queries about the installation or the certification of the unit – please contact
Raytec for immediate assistance and advice.
Safety Instructions
1
Installation
2
Maintenance
3
Technical Specification
4

Advertisement

loading
Need help?

Need help?

Do you have a question about the URBAN and is the answer not in the manual?

Questions and answers

Related Manuals for Raytec URBAN

Summary of Contents for Raytec URBAN

  • Page 1 Installation Maintenance Technical Specification Important information The URBAN series of industrial luminaires are specialist devices, for use in specific operating environments. The units must be installed in accordance with these instructions and must be installed by suitably qualified personnel. If you have any queries about the installation or the certification of the unit – please contact...

  • Page 2: Safety Instructions

    1. Safety instructions 1. Read this leaflet carefully before commencing to install the URBAN unit and retain it for future use. Installation can only be carried out by suitably qualified personnel. 2. Externally the URBAN unit housing is constructed from marine grade aluminium and polycarbonate outer optic, stainless steel brackets/fasteners and silicone gaskets, internally there are many non metallic components.

  • Page 3: Installation

    1. It is recommended that a MINIMUM of 2 fixing points must be used, the fixing points must be suitable for the conditions of use. The URBAN product is supplied with eye bolts to allow the product to be suspended.
  • Page 4 WL84 Emergency WL168 Emergency UK / Europe Tel: +44 (0) 1670 520055 www.raytecled.com Americas Tel: + 1 613 270 9990...
  • Page 5 Wiring Diagram – Standard Version Wiring Diagram – Emergency Version www.raytecled.com UK / Europe Tel: +44 (0) 1670 520055 Americas Tel: + 1 613 270 9990...
  • Page 6 The standard product is supplied with 2m of flex for terminating into a suitable plug, connector or terminal box. The mains supply flex on a standard unit is 3 core and is identified as the Green/Yellow (Earth), Brown (Live) and Blue (Neutral) terminals. Emergency units are supplied with a 4 core flex and identified as Green / Yellow (Earth), Grey (Neutral), Brown (Permanent Live), Black (Switched Live).
  • Page 7 URBAN Intelligent Emergency Operation Guide The Emergency version is equipped with a self-test functionality according IEC62034. 28 days after power-up the driver will perform a functional test of 30 seconds. • Every 6th test (after half a year) will be a duration test. This test will run until •...

  • Page 8: Technical Specification

    4. Technical Specification Input Voltage 150-264V AC Input Current (230Vac, full load) 0.13A Consumption 36W WL84 STD / 72W WL168 STD 39W WL84 EM / 75W WL168 EM Power Factor (230Vac, full load) >0.92 Mains Frequency 50/60Hz Inrush Current (I @50%) 20A, ∆t <...