From-To Page - Yamaha 03DVEK Owner's Manual

20

From-To Page

From-To Page
This section explains the parameters on the From-To page shown below. Use the [AUTO-
MIX] button to locate this page.
The From-To page is used to monitor transitions from one source to another, and can also
be used to assign FROM and TO channels to bus outs 1 to 4.
When a Transition Start command is received, the ESAM fader on FROM channels is set to
the LIMIT LEVEL, while the ESAM fader on TO channels is set to 0 dB. When the transition
is complete, FROM channels become TO channels, and TO channels become FROM chan-
nels.
To assign channels to bus outs, use the cursor buttons to select bus outs in the FROM
ASSIGN and TO ASSIGN windows, and the [SEL] buttons to add and remove channels.
Assignments made on this page are reflected on the [PAN/ROUTING] Pan 1-16 and Pan
17-24 pages. Likewise, assignments made on the [PAN/ROUTING] Pan 1-16 and Pan 17-24
pages are reflected on this page. Typically, Cross Point settings are made on the editor, oth-
erwise, operation may not be correct. Channels and bus outs configured as stereo pairs are
assigned simultaneously. Effects returns 1 and 2 are assigned automatically to both FROM
and TO.
03D Video Edit Suite Software—Owner's Manual